Showing 1–20 of 33 results

Show sidebar

FEMAC FLAIL / MULCHER – T1 60cm REV 1.2T – 2.5T (Hammer or Blade Rotor)

60 or 80 cm hydraulic mulcher applicable to excavators with weight 1.2-2.5 ton, suitable for drainage working on grass, bushes, brooms, up to a diameter of 3 cm.

It is a symmetrical mulcher, with identical input and output mouths. The faceplates are adjustable and open fully, to allow higher cutting capacity. It allows a faster cutting thanks to the excavator rotation.

Features

  • Direct transmission.
  • Internally reinforced with double metal sheet.
  • Symmetric shearing head, for quick rotation.
  • Input and output opening completely identical.
  • Protective cover for motor.
  • 4 Line rotor with tempered blade M1F.
  • Inside rotor supports with ”labyrinth” for protection of bearings from debris.
  • Double row spherical adjustable bearings of 1st quality.
  • Valves block complete with priority valve for adjusting oil flow, anti-shock valve (pressure relief valve), anti-cavitation.
  • Gear motor.
  • Accident prevention rubber protections according to EC directives

Options

  • Mounting hitch & pins.
  • Kit hoses Lg. 2 meters.
  • Front, back chain protection.
  • Feeler roller.
  • Self-levelling support ( 30kg).
  • Valves block deduction, only anti-cavitation.
£2,212.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T1 80cm REV 1.2T – 2.5T (Hammer or Blade Rotor)

60 or 80 cm hydraulic mulcher applicable to excavators with weight 1.2-2.5 ton, suitable for drainage working on grass, bushes, brooms, up to a diameter of 3 cm.

It is a symmetrical mulcher, with identical input and output mouths. The faceplates are adjustable and open fully, to allow higher cutting capacity. It allows a faster cutting thanks to the excavator rotation.

Features

  • Direct transmission.
  • Internally reinforced with double metal sheet.
  • Symmetric shearing head, for quick rotation.
  • Input and output opening completely identical.
  • Protective cover for motor.
  • 4 Line rotor with tempered blade M1F.
  • Inside rotor supports with ”labyrinth” for protection of bearings from debris.
  • Double row spherical adjustable bearings of 1st quality.
  • Valves block complete with priority valve for adjusting oil flow, anti-shock valve (pressure relief valve), anti-cavitation.
  • Gear motor.
  • Accident prevention rubber protections according to EC directives

Options

  • Mounting hitch & pins.
  • Kit hoses Lg. 2 meters.
  • Front, back chain protection.
  • Feeler roller.
  • Self-levelling support ( 30kg).
  • Valves block deduction, only anti-cavitation.
£2,322.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T11 FR130 6.0T-12.0T (Forestal Rotor)

PRODUCT CARD

12 cm hydraulic mulcher with belt transmission for 6.0-12.0 ton excavators. Suitable for drainage working on grass, bushes, brooms, wood, up to a diameter of 8 cm.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Strong hood with double sheet, removable for inspection.
– Side skids adjustable on 3 positions to change the height of the cut (only on T11 MZ/FR 130).
– Feeler roller adjustable on 3 positions to change the height of the cut (T11 MZ 160 standard equipment, T11 MZ/FR 130 accessory in replacement of side skids).
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 4.1-8.0 ton.
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters or Lg. on request.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller, T11 MZ/FR 130, not side skids.
4 – Self-levelling support ( 40kg), T11 MZ/FR 130.
4 – Self-levelling support ( 60kg), T11 160.
5 – Hydraulic frontal hood.
6 – Piston motor (no block valves).
7 – Block valves 1” for piston motor.
8 – Hydraulic rotation device ( not self-levelling support).
9 – Valves block deduction, only anticavitation.

£9,279.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T11 MZ130 6.0T-12.0T (Hammer or Blade Rotor)

PRODUCT CARD

12 cm hydraulic mulcher with belt transmission for 6.0-12.0 ton excavators. Suitable for drainage working on grass, bushes, brooms, wood, up to a diameter of 8 cm.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Strong hood with double sheet, removable for inspection.
– Side skids adjustable on 3 positions to change the height of the cut (only on T11 MZ/FR 130).
– Feeler roller adjustable on 3 positions to change the height of the cut (T11 MZ 160 standard equipment, T11 MZ/FR 130 accessory in replacement of side skids).
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 4.1-8.0 ton.
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters or Lg. on request.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller, T11 MZ/FR 130, not side skids.
4 – Self-levelling support ( 40kg), T11 MZ/FR 130.
4 – Self-levelling support ( 60kg), T11 160.
5 – Hydraulic frontal hood.
6 – Piston motor (no block valves).
7 – Block valves 1” for piston motor.
8 – Hydraulic rotation device ( not self-levelling support).
9 – Valves block deduction, only anticavitation.

£7,088.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T11 MZ160 6.0T-12.0T (Hammer or Blade Rotor)

PRODUCT CARD

12 cm hydraulic mulcher with belt transmission for 6.0-12.0 ton excavators. Suitable for drainage working on grass, bushes, brooms, wood, up to a diameter of 8 cm.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Strong hood with double sheet, removable for inspection.
– Side skids adjustable on 3 positions to change the height of the cut (only on T11 MZ/FR 130).
– Feeler roller adjustable on 3 positions to change the height of the cut (T11 MZ 160 standard equipment, T11 MZ/FR 130 accessory in replacement of side skids).
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 4.1-8.0 ton.
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters or Lg. on request.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller, T11 MZ/FR 130, not side skids.
4 – Self-levelling support ( 40kg), T11 MZ/FR 130.
4 – Self-levelling support ( 60kg), T11 160.
5 – Hydraulic frontal hood.
6 – Piston motor (no block valves).
7 – Block valves 1” for piston motor.
8 – Hydraulic rotation device ( not self-levelling support).
9 – Valves block deduction, only anticavitation.

£8,402.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 DF105 REV 8.0T-16.0T (fixed tooth Mulcher)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£12,401.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 DF130 REV 8.0T-16.0T (fixed tooth Mulcher)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£13,880.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 FR105 REV 8.0T-16.0T (Forestal Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£9,881.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 FR130 REV 8.0T-16.0T (Forestal Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£10,703.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 MZ105 8.0T-16.0T (Hammer or Blade Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£7,745.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T13 MZ130 REV 8.0T-16.0T (Hammer or Blade Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 130cm cutting length 8.0 – 16.0 ton excavators. Suitable for drainage working, land clearance and light duty mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally reinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Adjustable hoods , fully openable for higher cutting capacity.
– Side skids adjustable on 3 positions to change the height of the cut.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Double Row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Cast iron gear motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
2 – Kit hoses Lg. 2.5 meters.
2 – Kit hoses Lg. 2.5 meters for piston motor.
3 – Feeler roller.
4 – Self-levelling support ( 60kg).
5 – Piston motor (no block valves).
6 – Block valves 1” for piston motor.
7 – Hydraulic rotation device ( not self-levelling support).
8 – Valves block deduction, only anticavitation.

£8,512.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 DF130 REV 10T-25T (fixed tooth Mulcher)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£18,810.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 DF160 REV 10T-25T (fixed tooth Mulcher)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£21,166.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 FR130 REV 10T-25T (Forestal Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£17,550.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 FR160 REV 10T-25T (Forestal Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£20,015.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 MZ130 REV 10T-25T (Hammer or Blade Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£15,030.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T15 MZ160 REV 10T-25T (Hammer or Blade Rotor)

PRODUCT CARD

A high quality Italian built flail with up to 160cm cutting length 10.0 – 25.0 ton excavators. Suitable for drainage working, land clearance and mulching.

The REV stands for reversible and the unit can be swept back and forth for continuous cutting without lifting off the ground.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– MZ Helicoidal Rotor with hammers austempered and cutting blade interchangeable.
– Toothed high-performance belts transmission.
– Internally rinforced with inside double-case body with interspace.
– Protective belts-cover.
– Shearing symmetric head, for a faster working by the excavator rotation.
– Input and output mouths completely identical, adjustable
– Hydraulic hoods , fully openable for higher cutting capacity.
– Inside Rotor Supports with ”labyrinth” for the protection of the bearings by the impurities.
– Adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Piston motor.
– Accident prevention chains protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins 8.1-12.0 ton.
1 – Mounting hitch & pins 12.1-16.0 ton.
1 – Mounting hitch & pins 16.1-25.0 ton.
2 – Kit hoses Lg. 2.5 meters.
3 – Hood 1 mechanical opening
4 – Hood 2 mechanical opening

£17,550.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T20 DF130 13T-30T (fixed tooth Mulcher)

PRODUCT CARD

Heavy Duty Mulcher for 15T-30T machines.

Features:

  • Toothed high-performance belt transmission.
  • Internally reinforced with double-case body with interspace
  • Protective belts cover
  • Strong faceplate with double sheet, removable for inspection
  • Side skids adjustable on 3 positions to change the height of the cut.
  • Fixed tooth rotor with wider plate
  • Inside rotor supports with ”labyrinth” for the protection of the bearings
  • Double row spherical adjustable bearings of 1st quality
  • Valve block
  • Piston motor
  • Hydraulic openable browband
  • Protection chains according to EC directives
£20,015.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T20 DF180 13T-30T (fixed tooth Mulcher)

PRODUCT CARD

Heavy Duty Mulcher for 15T-30T machines.

Features:

  • Toothed high-performance belt transmission.
  • Internally reinforced with double-case body with interspace
  • Protective belts cover
  • Strong faceplate with double sheet, removable for inspection
  • Side skids adjustable on 3 positions to change the height of the cut.
  • Fixed tooth rotor with wider plate
  • Inside rotor supports with ”labyrinth” for the protection of the bearings
  • Double row spherical adjustable bearings of 1st quality
  • Valve block
  • Piston motor
  • Hydraulic openable browband
  • Protection chains according to EC directives
£21,878.00 Exc VAT Add to basket

FEMAC FLAIL / MULCHER – T3 70cm 1.5T – 4T (Hammer or Blade Rotor)

PRODUCT CARD

A high quality Italian built flail with 70-90cm cutting length for 1.5T – 4.0T excavators . Suitable for drainage working, land clearance and light duty mulching.

TECHNICAL FEATURES AND STANDARD EQUIPMENT
– Direct transmission.
– Internally reinforced with double metal sheet.
– Feeler roller adjustable on 3 positions to change the height of the cut.
– Helicoidal rotor with austempered hammers or blade interchangeable.
– Protective cover for motor.
– Inside rotor supports with labyrinth for the protection of the bearings by the impurities.
– Double row spherical adjustable bearings of 1st quality.
– Valves block complete with priority valve for anti-cavitation.
– Gear motor.
– Accident prevention rubber protections according to EC directives.

ACCESSORIES
1 – Mounting hitch & pins.
2 – Kit hoses Lg. 2 meters.
3 – Front chain protection.
4 – Self-levelling support ( 30kg).
5 – Valves block deduction, only anticavitation.

£2,979.00 Exc VAT Add to basket